Skip to main content

Building Type E: How a New Law Aims to Make Housing Construction in Germany More Affordable

19. November 2026

Building Type E is a proposed statutory baseline standard in construction contract law designed to allow parties involved in a construction project to forgo certain comfort features that exceed the statutory minimum requirements—without thereby incurring liability risks. The “E” stands for “simple.” The Federal Ministry of Justice and Consumer Protection (BMJV) presented a corresponding draft bill at the end of October 2026. For builders, contractors, and property owners, the law could significantly reduce the cost of residential construction.

At a Glance

The draft bill on Building Type E supplements construction contract law with a voluntary baseline standard. Building owners and contractors can agree to construct a building according to this reduced standard—without compromising on safety, fire protection, or healthy living conditions. Anyone who complies with the statutory minimum requirements is on the safe side, even if DIN standards or the usual market standard impose higher requirements. Initial pilot projects show that construction costs can be reduced by about 10 to 15 percent by foregoing standards that exceed the minimum requirements. The law relies on voluntary agreement—nothing changes for those who do not opt for Building Type E.

Why Construction in Germany Is So Expensive

Housing construction in Germany is among the most expensive, even by international standards. A key reason lies not only in material and land prices but also in construction contract law. Until now, a contractor has generally been obligated to deliver work that meets the customary standard of comparable buildings. This customary standard often falls well above the statutory minimum requirements—for example, regarding sound insulation, floor-to-ceiling heights, or interior design.

Anyone wishing to deviate from this customary standard must, under current law, provide comprehensive information about the consequences and risks of such a deviation. In practice, many contractors shy away from this effort and the associated liability risks. The result: Construction costs are regularly higher than necessary—even when the building owner and contractor agree that a simpler standard would suffice.

What the Bill Proposes

The draft adds a voluntary regulatory framework to the construction contract law in the Civil Code. In the future, the parties to a construction project may expressly agree that the building will be constructed in accordance with the Building Type E Basic Standard. If they do not reach such an agreement, everything remains as before—this is therefore an opt-in solution, not a lowering of the general standard.

For Building Type E, the following principle applies: whoever complies with the legal requirements has fulfilled their contractual obligation. If the states’ technical building regulations specify a concrete requirement—such as floor-to-floor height—compliance with that requirement is sufficient. It does not matter whether DIN standards, industry-standard rules, or comparable new buildings stipulate a higher standard. However, the parties may deliberately agree on a higher comfort standard for specific points.

For areas where the Technical Building Regulations do not specify concrete requirements, the previous rules generally apply. Here, too, the draft provides some relief: contractors should be able to deviate from the usual standard more easily. Instead of a comprehensive explanation of the consequences and risks, a simple written notice—such as via email—should suffice.

What remains unchanged: Safety remains unaffected

The draft bill expressly emphasizes that choosing Building Type E does not result in any compromises regarding safety and healthy living conditions. The public-law requirements of building codes—in particular the Technical Building Regulations of the federal states, which include specifications on fire protection, ventilation, and natural lighting—must be fully complied with. The basic standard applies exclusively to comfort and amenity features that go beyond these mandatory requirements.

What Homeowners Should Keep in Mind Regarding Consumer Construction Contracts

For consumer construction contracts—that is, contracts in which a contractor erects a new building for a private builder—the draft contains supplementary protective provisions. The building specifications must explicitly state that construction is being carried out in accordance with Building Type E. In addition, they must include information on the sound insulation standard and provide an estimate of the costs saved by deviating from the usual standard. This is intended to enable private builders to make an informed decision.

Next Steps

The draft bill was sent to the states and industry associations on October 26, 2026. The deadline for comments is November 9, 2026. This will be followed by the regular legislative process. Until the law takes effect, the existing rules of construction contract law will remain unchanged.

Frequently Asked Questions About Building Type E

What does Building Type E mean?

The “E” stands for “simple.” Building Type E is a planned statutory baseline standard that allows for the omission of comfort features exceeding the statutory minimum requirements. Safety requirements are not lowered.

Is Building Type E mandatory?

No. It is a voluntary agreement between the parties to a construction project. For those who do not agree to Building Type E, the existing rules of construction contract law continue to apply.

How much can be saved by using Building Type E?

According to the BMJV, initial pilot projects show that waiving standards above the statutory minimum requirements can reduce construction costs by about 10 to 15 percent.

Are DIN standards ignored under Building Type E?

Not as a general rule. If the technical building regulations of the federal states specify a concrete requirement, compliance with those regulations is sufficient—even if DIN standards prescribe a higher standard. For areas without official requirements, the existing rules generally apply, but with more flexible options for deviations.

As a private builder, can I commission a Building Type E project?

Yes. However, supplementary disclosure requirements apply to consumer construction contracts. The building specifications must clearly state that construction is being carried out according to Building Type E, which sound insulation standard applies, and what cost savings result from this.

This article was reviewed by the tax advisors and certified public accountants at Trimborn . Partner.

About Trimborn . Partner

Trimborn . Partner is an award-winning tax consulting and auditing firm with offices in Düsseldorf and Oberhausen. As experienced tax advisors and certified public accountants, we advise property owners, construction companies, and small-to-medium-sized businesses on all tax and financial matters related to construction projects, real estate investments, and optimal contract structuring. Feel free to contact our tax advisory experts in Düsseldorf and Oberhausen.


Office Düsseldorf

Kasernenstr. 40, 40213 Düsseldorf

Office Oberhausen Sterkrade

Holtkampstraße 19-21, 46145 Oberhausen

After-Hours Hotline

Outside business hours

© Trimborn . Partner Steuerberater in Partnerschaft mbB.
Nur einen Anruf entfernt…

Ihre Steuerexperten in Düsseldorf und Oberhausen

Düsseldorf
Oberhausen
Just one call away...

Your tax consultants in Düsseldorf and Oberhausen

Düsseldorf
Oberhausen